Ambages - МИКРОТЕХ®

Details

The most common method of checking the average diameter of external threads is measurement using wires. The diameter of the wires is selected depending on the thread pitch, based on the condition that the wires touch the thread profile in the average diameter zone. This diameter is called the most advantageous.

Type
Type	Wire diameter, mm	Pitch, mm	Type of thread being checked
0,2-0,118	0.118	0.2	Metric
0,25-0,142	0.142	0.25	Metric
0,3-0,185	0.185	0.3	Metric
0,35-0,202	0.202	0.35	Metric
0,4-0,231	0.231	0.4	Metric
0,45-0,250	0.250	0.45	Metric
0,5-0,291	0.291	0.5	Metric
0,6-0,343	0.343	0.6	Metric
0,7-0,404	0.404	0.7	Metric	26730
0,75-0,433	0.433	0.75	Metric	26730
0,8-0,462	0.462	0.8	Metric	26730
1-0,572	0.572	1	Metric	26730
1,25-0,724	0.724	1.25	Metric	26730
1,5-0,866	0.866	1.5	Metric	26730
1,75-1,008	1.008	1.75	Metric	26730
2-1,157	1.157	2	Metric	26730
2,5-1,443	1,443	2.5	Metric	28350
3-1,732	1,732	3	Metric	28350
3,5-2,050	2,050	3.5	Metric	28350
4-2,309	2,309	4	Metric	28350
4,5-2,598	2,598	4.5	Metric	28350
5-2,886	2,886	5	Metric	28350
5,5-3,177	3,177	5.5	Metric	29970
6-3,464	3,464	6	Metric	29970
0,907-0,511	0.511	0.907	Tubular cylindrical
1,337-0,754	0.754	1.337	Cylindrical pipe
1,814-1,023	1.023	1,814	Cylindrical pipe
2,309-1,302	1,302	2,309	Cylindrical pipe
1,5-0,776	0.776	1.5	Trapezoidal
2-1,035	1.035	2	Trapezoidal
3-1,553	1,553	3	Trapezoidal
4-2,071	2,071	4	Trapezoidal
	2,588	5	Trapezoidal
	3,106	6	Trapezoidal
	3,623	7	Trapezoidal
	4,141	8	Trapezoidal
	4,659	9	Trapezoidal
	5,176	10	Trapezoidal
	6,212	12	Trapezoidal
	7,247	14	Trapezoidal
	8,282	16	Trapezoidal
	9,317	18	Trapezoidal
	10,353	20	Trapezoidal
	11,388	22	Trapezoidal
	12,423	24	Trapezoidal
	14,493	28	Trapezoidal
	16,565	32	Trapezoidal
	18,634	36	Trapezoidal
	20,706	40	Trapezoidal

*Prices do not include 20% VAT.